ELECTRIC FENCE ENERGISERS

Bulldozer - 110 volt Fence Controllers

Low Impedance

10, 25 or 50 Mile Range

CSA Approved

Bulldozer Models have a fuseless design for improved lightning protection; vented, weather resistant, non-conductive cabinet; moisture resistant internal components; shocks throught wet weeds.

Two Year Warranty from date of manufacture.

The WASP - 110 volt

Low Impedance

200 Mile Range

CSA Approved

 

The WASP is the most powerful fencer made in the USA. It has a fuseless design for improved lightening protection; vented, weather resistant, non-conductive cabinet; 20 stored joules; 15 joule energy output; Digital timing.

Two Year Warranty from date of manufacture.

The TARANTULA - 12 volt battery operated.

Low Impedance

50 Mile Range

CSA Approved

 

The Tarantula shocks through wet weeds; ideal for remote locations; 2 joule energy output; for max. battery life and performance use a 12v Deepcycle at least 126 amp hour rating.

Two Year Warranty from date of manufacture.

The YELLOW JACKET - 3 Option Battery Operated (D-Cell, 6 or 12 volt)

Low Impedance

10 Mile Range

CSA Approved

The Yellow Jacket has a built-in ground rod strap & fence wire strap; extremely portable & easy to use - ideal for rotational grazing & packing trips; 3 postion switch ON 1, OFF, ON 2 for max. output of battery saver mode; fence lamp flashes when system is operating.

Two Year Warranty from date of manufacture.

RED SNAP'R - 110 Volt Fence Controllers

Low Impedance

15, 30, 50 or 100 Mile Range

CSA Approved

Standard Duty - 110 Volt Fence Controllers. 3 or 15 Mile Range. CSA Approved

Low Impedance - 12 volt Battery Operated.

15 or 30 Mile Range

CSA Approved

 

The special circuitry of Low Impedance Fence Controllers is designed to provide higher voltage and energy levels and maintain maximum joule levels as fencing conditions become more difficult. Ideal for longer fences, heavily weeded, multi-strand, and high tensile fences.

Two Year Warranty from date of manufacture.

Standard Duty Fence Controllers operate over 3 - 15 miles. They produce high voltage, short duration shocks, ideal to control livestock under "clean fence" conditions.

Two Year Warranty from date of manufacture.

SOLAR FENCE CONTROLLERS

RED SNAP'R - comes complete with panel & 6 volt battery

Low Impedance

3 or 10 Mile Range

Trickle Charger for Battery Available

 

These State-of-the-Art Low Impedance Solar Fence Controllers are designed with special circuitry & transformers which provide & maintain maximum joules, high voltage & energy levels as fencing conditions become more difficult. With increased energy output, these fencers overcome shorts or energy drains caused by heavy vegetation, fences in poor condition & long fencelines. They do not ground out on wet grasses, heavy weeds or thick brush.

Two Year Warranty from date of manufacture.

The SUN SCORPION - comes complete with panel & 12 volt battery

Low Impedance

30 Mile Range

The Sun Scorpion is the most powerful Solar Fencer made in the USA. It has a vented, weather resistant, non-conductive cabinet; .66 Stored joules; .50 joule energy output; new solar region setting switch for optimum performance and battery life; operates day and night - up to 2 weeks with no sun; digital timing.

Two Year Warranty from date of manufacture.

ELECTRIC FENCE GROUNDING

GROUNDING IS IMPERATIVE FOR ALL ELECTRIC FENCING

5' or 7' Galvanized Ground Rods available with Galvanized Clamps

Insulated Connection Cable (steel) available in 15, 30, 50 or 76 metre rolls.

Ground Rod Kit Available - includes 3 - 5' Ground Rods, 3 Clamps & 1 - 30 metre roll of Insulated Connection Cable

Why is grounding so important?

If the ground system is insufficient, electricity cannot find a path to the fencer and little or no shock is given. An animal provides this path when it touches the fence wire and the earth simultaneously. The electricity then passes through the animal into the soil and back to the ground rods, which are connected to the ground terminal of the fence controller. Only then is the circuit completed and the animal receives an electrical shock.

Sandy, dry soils may require a ground- wire return system. Refer to the installation manual included with your fence controller.

How to Ground Your System

A. Install the controller in a building or weatherproof area. Solar fence controllers should be mounted outside, facing the equator for maximum sun exposure.

B. Drive three 5' or 7' ground rods (galvanized metal) into permanently moist soil about 10' apart and at least 50' from other electrical grounds. If the soil is dry or subject to freezing part of the year, additional ground rods spaced 10' apart may be needed.

C. Connect the "ground" terminal on the fence controller to the ground rods with insulated connection cable and galvanized ground rod clamps.

D. Connect the "fence" terminal on the controller to the fence wire using insulated connection cable and appropriate clamp whether to Rope, tape or High Tensile Wire.


"Quality products and service for over 20 years"

Tel: (250) 757-9677 Fax: (250) 757-9670
430 Grove Hill Road, Qualicum Beach, BC V9K 2A3
Email: info@ferrisfencing.com