top of page

Grounding & Accessories

Why is Grounding Important?

If the ground system is insufficient, electricity cannot find a path to the fence controller and little or no shock is given.  An animal provides this path when it touches the fence wire and the earth simultaneously.  The electricity then passes through the animal into the soil and back to the ground rods, which are connected to the ground terminal of the fence controller.  Only then is the circuit completed and the animal receives an electrical shock.

Detailed installation & grounding instructions are included with every fence controller.

Electric Fence Ground Rod & clamp
Electric Fence Ground Rod Clamp

Ground Rods Galvanized

3/4" x 5 ft.

1/2" x 6 ft.

Ground Rod Clamp

  • Galvanized  fits up to 3/4" Ground Rod

  • used to attach connection cable to ground rod

Electric Fence Grounding Diagram

A    Install the fence controller in a building or weatherproof area.             Solar fence controllers need to be mounted outside, facing the           equator for maximum sun exposure.

  Drive three galvanized ground rods into moist soil about 10'               apart and at least 50' from other electrical grounds.  If the soil is         dry or subject to freezing part of the year, additional ground               rods spaced 10' apart may be required.

C    Connect the "ground" terminal on the fence controller to the               ground rods with insulated wire and ground rod clamps.

D    Connect the "fence" terminal on the fence controller to the                 fence wire using insulated wire.                                                      

Insulated Connection Cable

High voltage insulated Connection cable

Item 44818    25m Spool

Item 44921    50m Spool

Item 44922    100m Spool

  • double insulated

  • for fence & earth cables

  • ideal for permanent fence systems

Joint Clamp 

galvanized or stainless steel

  • ensures tight connections on galvanized wires

  • Ideal for electrical hook-ups

  • Disconnects easily for troubleshooting shorts

  • Holds up to four 12.5 ga. wires

Crocodile Clip for Electric Fence

Fence Connection cable, double

Item 441608    Red    1/pkg

  • Connecting parts made from stainless steel

  • with 2 crocodile clips

  • Cable length: 60 cm

Crocodile Clip for Electric Fence

Ground & Fence Connector Cable

Item 44606/011    green    1/pkg

  • connecting parts made from stainless steel

  • with M8 metal eyelet, with crocodile clip

  • Cable length: 100 cm

Rope Connecting Cable

Item 44627    Red    1/pkg

  • ideal mechanical & electrical connection between energizer & fencing rope

  • with M8 metal eyelet

  • Cable length: 150 cm

  • rope up to 6.5 mm

Tape Connecting Cable

Item 44617    Red    1/pkg

  • ideal mechanical & electrical connection between fence device & tape

  • stainless steel clamping plates

  • with M8 metal eyelet

  • Cable length:  130 cm

  • tape up to 40 mm

3 way on/off switch for electric fence

On/Off Switch

Item 44607    Black/Red

  • practical on/off & changeover switch for your fence system

  • ideal also for mains operated fence lines

  • switches two separate fence systems

Heavy Duty Cut Out

Switch

Item 180-195    Black

  • cut out switches are used to turn electric fence off along the fence line while troubleshooting or making repairs

  • saves a trip back to the fence controller

  • unused pastures & heavily weeded bottom wires may be easily disconnected to increase fence voltage

Warning Sign

CORRAL   200x 120 mm

PATRIOT  Eng/Fr/Sp.  8" x 4"

  • attach at places open to the public

  • made of stable grade plastic

  • printed on both sides